COMP Cams K07-466-8 OE-Style Hydraulic Roller Lifter Set for '87+ SBC and LT/LS
Albertan Owned
Financing Available
Top-Quality Suppliers
Description
Resources
Installation InstructionsResources
Installation InstructionsSpecifications
| Advertised Exhaust Duration | 276 |
| Advertised Intake Duration | 268 |
| Amazon ASIN | B001GF18NG |
| Assembly Lubricant Included | No |
| Basic Operating RPM Range | 1,800-5,800 |
| C.A.R.B. E.O. Number | N/A |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles? | No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? | Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exemption Reason | N/A |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Cam Type | Hydraulic Roller |
| Camshaft Gear Attachment | 3-Bolt |
| Camshaft Material | Austempered Ductile Iron |
| Camshaft Series | XFI |
| Description_ASM | Pontiac: Firebird 92 - 92 5.7 L Engine, Chevrolet: Camaro 92 - 93 5.7 L Engine, Chevrolet: Corvette 92 - 92 5.7 L Engine |
| Description_DEF | Engine Camshaft Kit |
| Description_DES | 7 Steel Retainer Set of 16 for 11/32" Valve w/ 26915/26918 Beehive Springs |
| Description_DES | Hardened Steel Set of 16 - 7 Degree, 11/32", Single Groove Street Locks |
| Description_DES | OE-Style Hydraulic Roller Lifter Set for '87+ SBC and LT/LS |
| Description_DES | Performance Street 1.310" OD Beehive Spring; 1.800" Installed Height; 16 Springs |
| Description_DES | Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem |
| Description_DES | XFI 218/224 Hydraulic Roller Cam for GM LT1/LT4 |
| Description_DES | XFI 218/224 Hydraulic Roller K-Kit for GM LT1/LT4 |
| Description_EXT | Good low end torque with exceptional mid-range. Needs upgraded exhaust and programmer or chip. |
| Description_INV | XFI 218/224 Hyd Roller K-Kit GM LT1/LT4 |
| Description_KEY | SBC; Chevrolet; Chevy Small Block; Small Block Chevrolet; 305; 350; LT1; LT4; Chevelle; Camaro; Swap; Corvette; Bel Air; Z28; Z2/8; Duntov; Nova; Monaro; Firebird; Trans-Am; Pontac; C10; C20; K10; Blazer; S10; Monza; Ventura; Monte Carlo; Malibu; El Camino; Caprice; Vortec; SS |
| Description_MKT | K-KIT - Complete Kit Includes: Camshaft, Lifters, Valve Springs, Retainers, Valve Locks, Valve Stem Seals, Timing Chain Set, Assembly Lube (in flat tappet applications), Decals and Instructions. |
| Description_SHO | Engine Camshaft Kit |
| Description_SHP | None |
| Engine Family | GM LT1 and LT4 350 c.i. 8 Cylinder (1995-1997) |
| Exhaust Duration at .050 inch Lift | 224 |
| Exhaust Valve Lift | 0.565 |
| Gaskets Included | No |
| height | 5.0 |
| Intake Duration at .050 Inch Lift | 218 |
| Intake Valve Lift | 0.57 |
| Kit Type | K-Kit - Complete Kit |
| length | 25.5 |
| Lifter Type | Hydraulic Roller |
| Lifters Included | Yes |
| Lobe Separation | 113 |
| LTL | N |
| Timing Chain and Gears Included | No |
| Title | XFI 218/224 Hydraulic Roller K-Kit for GM LT1/LT4 |
| Usage | Street/Performance |
| Valve Springs Included | Yes |
| Valve Stem Seals Included | Yes |
| weight | 18.35 |
| width | 10.25 |