ICON Vehicle Dynamics K62515L 17-19 FORD F250/F350 2.5" STAGE 5 SUSPENSION SYSTEM W EXPANSION PACK
Albertan Owned
Financing Available
Top-Quality Suppliers
Description
Specifications
| Add-On Part | 191014 - .25" COLLAR SPANNER PIN WRENCH |
| Add-On Part | 61111 - 17-UP FSD FRONT 2.5" EXTENDED SS BRAKE LINE KIT |
| Add-On Part | 64039 - 08-UP FSD TRACK BAR BUMP STEER BRACKET KIT |
| California Proposition 65 | WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
| Description_ASC | APPLICATION NOTE #119: RARE CASES REQUIRE A 2.6 DEGREE ALIGNMENT CAM ON ONE SIDE OF VEHICLE FOR PROPER CASTER SPLIT |
| Description_ASC | APPLICATION NOTE #151: FITS SINGLE REAR WHEEL MODELS ONLY |
| Description_ASC | APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE |
| Description_ASC | APPLICATION NOTE #6: SPRINGS ARE RATED FOR DIESEL ENGINES ONLY |
| Description_ASC | OEM Wheels & Tires Fitment: Yes |
| Description_ASC | Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" tires may fit but fender trimming and modifications will be required.) |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset |
| Description_ASC | TECH NOTE: Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install) |
| Description_ASC | TECH NOTE: Compatible with 4WD models only |
| Description_ASC | TECH NOTE: ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry for 2.5-5.5" of front lift |
| Description_ASC | TECH NOTE: Not compatible with F-350 Cab & Chassis models |
| Description_ASC | TECH NOTE: Replaces OE rear blocks for .5" of rear lift over stock on F-250. Lowers F-350 rear ride height by .5" compared to stock. |
| Description_DEF | Suspension Lift Kit |
| Description_DES | 05-19 FSD FRONT 2.5" DUAL RATE SPRING KIT |
| Description_DES | 05-22 FSD DUAL STABILIZER KIT |
| Description_DES | 05-23 FSD 2" BUMP STOP SPACER KIT |
| Description_DES | 05-23 FSD 2" REAR BUMP STOP SPACER KIT |
| Description_DES | 05-23 FSD 4WD 0-2.5" FRONT 2.5 VS RR CDCV PAIR |
| Description_DES | 08-23 F250/F350 LEAF SPRING EXPANSION PACK |
| Description_DES | 1" CAST BLOCK KIT |
| Description_DES | 11-UP FSD REAR 12" U-BOLT KIT |
| Description_DES | 17-19 FORD F250/F350 2.5" STAGE 5 SUSPENSION SYSTEM W EXPANSION PACK |
| Description_DES | 17-23 FSD ADJ TRACKBAR KIT |
| Description_DES | 99-23 FSD 0-3" REAR 2.5 VS PB CDCV PAIR |
| Description_DES | 99-UP FSD 4WD STABILIZER(DUAL OPPOSING) 2.0 VS IR |
| Description_EXT | ICON 2.5” suspension systems lift your Ford Super Duty while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market. |
| Description_FAB | 100% Bolt-on system - no drilling, cutting or welding necessary for install |
| Description_FAB | Application specific alignment Cams ensure proper caster alignment |
| Description_FAB | Dual steering stabilizer kit for smooth wheel control while driving |
| Description_FAB | Front and rear shocks equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard |
| Description_FAB | ICON engineered dual rate coil springs provide 2.5” of front lift over stock |
| Description_FAB | Increased wheel travel and improved ride quality over stock with no change in towing capacity |
| Description_FAB | Leaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap |
| Description_FAB | Less body-roll than stock |
| Description_FAB | Lifetime guarantee that springs won’t sag or break |
| Description_FAB | No drive shaft modifications required |
| Description_FAB | On-vehicle adjustable track bar for optimum front axle centering and minimal deflection |
| Description_FAB | Shocks are fully rebuildable and re-tunable |
| Description_FAB | Vehicle specific tuned remote reservoir front and piggyback reservoir rear 2.5 Aluminum Series shocks |
| Description_INV | K62515L |
| Description_MKT | The ICON 2.5” suspension system is a great way to lift your 4WD 2017-2019 Ford F-250/F-350 Super Duty while improving ride quality and performance. This upgraded Stage 5 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. Also included in this stage is ICON's CDC Valve front and rear shocks, for those desiring an easy way to tune the ride externally with 10 settings, from soft to hard. ICON's Stage 5 System is comprised of dual rate coil springs, 2.5 Aluminum Series CDCV remote reservoir front and CDCV piggyback reservoir rear shocks, adjustable front track bar with massive FK rod end, alignment cams for adding caster, dual steering stabilizer kit with ICON 2.0 Aluminum Series stabilizers, and rear leaf spring expansion packs with blocks and U-bolts for a more compliant ride and reduced axle wrap. ICON 2.5" remote reservoir and piggyback reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market. |
| Description_SHO | SUSPENSION SYSTEM |
| height | 19.0 |
| length | 54.0 |
| Title | ICON 17-19 Ford F250/F350 4WD, 2.5" Lift, Stage 5 Suspension Sys w/ Leaf Spring |
| weight | 354.0 |
| width | 48.0 |