ICON Vehicle Dynamics K62502 2005-2016 FORD F250/F350 2.5" LIFT STAGE 3 SUSPENSION SYSTEM
Albertan Owned
Financing Available
Top-Quality Suppliers
Description
Specifications
| Add-On Part | 64039 - 08-UP FSD TRACK BAR BUMP STEER BRACKET KIT |
| California Proposition 65 | WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
| Description_ASC | APPLICATION NOTE #30: AN ADJUSTABLE TRACK BAR MAY BE NEEDED TO REALIGN THE AXLE FROM LEFT TO RIGHT, OR TO ADD ADDITIONAL STRENGTH |
| Description_ASC | APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE |
| Description_ASC | APPLICATION NOTE #6: SPRINGS ARE RATED FOR DIESEL ENGINES ONLY |
| Description_ASC | OEM Wheels & Tires Fitment: Yes |
| Description_ASC | Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.) |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.00” Backspace / 6mm Offset |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25” Backspace / 6mm Offset |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.25” Backspace / 6mm Offset |
| Description_ASC | Ships in multiple boxes |
| Description_ASC | TECH NOTE: 2005-2016 F-250s require 4” rear blocks with 15” U-bolt kit to sit level with 2.5” lifted front. ICON block kit part # 194275 and U-bolt kit part # 37003 (2005-2010 models) or part # 67003 (2011-2016 models) are recommended. |
| Description_DEF | Suspension Lift Kit |
| Description_DES | 05-16 FORD F250/F350 2.5" STAGE 3 SUSPENSION SYSTEM |
| Description_DES | 05-19 FSD FRONT 2.5" DUAL RATE SPRING KIT |
| Description_DES | 05-UP FSD 4WD 0-2.5" FRONT 2.5 VS PB PAIR |
| Description_DES | 99-UP FSD 0-3" REAR 2.5 VS PB PAIR |
| Description_EXT | 2005-2016 FORD F250/F350 2.5" LIFT STAGE 3 SUSPENSION SYSTEM |
| Description_FAB | 100% Bolt-on system - no drilling, cutting or welding necessary for install |
| Description_FAB | Application Specific Alignment Cams ensure proper Caster alignment |
| Description_FAB | Corrosion resistant, one-piece impact extruded aluminum shock bodies with 7/8" shafts |
| Description_FAB | ICON engineered dual rate coil springs with match tuned performance shocks |
| Description_FAB | Increased wheel travel and ride quality over stock with no change in towing capacity |
| Description_FAB | Less body-roll than stock |
| Description_FAB | Lifetime guarantee that coil springs won’t sag |
| Description_FAB | No drive shaft modifications required |
| Description_INV | 05-16 F250/F350 2.5" STAGE 3 SUSP SYSTEM |
| Description_MKT | For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Rear Shocks. |
| Description_MKT | The ICON 2.5” suspension system is a great way to level your 4WD 2005-2016 Ford F250/350 Super Duty while improving ride quality and performance. This Stage 3 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. ICON's Stage 3 System is comprised of dual rate coil springs, alignment cams for adding caster, and ICON 2.5 Aluminum Series piggyback reservoir shocks front and rear. ICON 2.5" reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market. |
| Description_SHO | SUSPENSION SYSTEM |
| Description_TRA | ICON 2005-16 Ford F250/F350, 2.5" Lift, Stage 3 Suspension System, K62502 |
| height | 6.0 |
| length | 27.0 |
| LTL | N |
| Title | 05-16 FORD F250/F350 2.5" STAGE 3 SUSPENSION SYSTEM |
| weight | 119.0 |
| width | 12.0 |