Hooker BH13244 Blackheart Header-Back Exhaust System
Albertan Owned
Financing Available
Top-Quality Suppliers
Description
Specifications
| Description_ASC | Holley Performance Emission Code 8: This product is engineered to facilitate the installation of a later model; emissions friendly engine into a vintage/classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply: If there is a reasonable basis for knowing that emissions are not adversely affected as described in EPA Memo 1A/The resulting vehicle is identical (with regard to all emissions related parts; engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis/The vehicle is a uncontrolled vehicle-Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles/An EO legal engine swap kit is utilized (such as a GM EROD)/The vehicle is being used for Competition Use Only-Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. NOTE: Consumers are responsible for complying with laws prohibiting tampering; and for ensuring that modified vehicles are operated in a manner that complies with applicable laws. |
| Description_DEF | Exhaust System Kit |
| Description_DES | Blackheart Header-Back Exhaust System |
| Description_EXT | Blackheart Header-Back Exhaust System; Fits w/1975-1981 Camaro/Firebird w/LS Swap; Dual; 2.5 in. Tubing; Natural Finish; Stainless Steel; |
| Description_FAB | Bolt-On Installation |
| Description_FAB | Deep Aggressive Tone |
| Description_FAB | Lightweight 304 Stainless Steel |
| Description_FAB | Limited Lifetime Warranty |
| Description_FAB | Mandrel Bent Tubing For Smooth Exhaust Flow |
| Description_FAB | Quality Welds For Strength/Longevity/Good Looks |
| Description_FAB | Tube Geometry Designed For Max Clearance/Hassle Free Install |
| Description_FAB | Utilizes Factory Mounting Points |
| Description_INV | 1975-81 GM F-BODY 2.5 IN EXH SYSTEM |
| Description_LAB | Proposition 65 |
| Description_MKT | Full stainless steel exhaust system for 1975-1981 2nd Gen F-body Camaro/Firebird with LS Engine comes complete with stamped crossover for a broad torque curve, TIG welded stainless steel straight through designed absorption style mufflers, for up to 450HP; single turn-down exit under each quarter panel for an stealthy look. |
| Description_SHO | Exhaust System Kit |
| Exhaust Type | Header-Back |
| Exit Position | Dual Out Side |
| height | 16.0 |
| Inlet Inside Diameter | 2.500 in. |
| length | 52.0 |
| LTL | N |
| Material | 304 Stainless Steel |
| Tail Pipe Diameter | 2.500 in. |
| Tubing Diameter | 2.500 in. |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| weight | 68.0 |
| width | 19.0 |