Edelbrock 7163 Edelbrock Performer RPM 2-R Intake Manifold for Chevrolet 396-502 Big-Block V8
Albertan Owned
Financing Available
Top-Quality Suppliers
Description
Specifications
| Cylinder Head Type | Rectangular Port |
| Description_ABR | Intake Mnfld |
| Description_ASM | Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L) |
| Description_DEF | Engine Intake Manifold |
| Description_DES | INTAKE MANIFOLD |
| Description_EXT | Edelbrock Performer RPM 2-R Intake Manifold for Chevrolet 396-502 Big-Block V8 |
| Description_FAB | Best for the Ultimate in Street High-Performance |
| Description_FAB | Designed for Square Port Heads |
| Description_FAB | Dual-Plane High-Rise Intake w/180 Deg. Firing Order |
| Description_FAB | Edelbrock Total Power Package Maximizes Gains |
| Description_FAB | Larger Plenum and Runners Maximizes Other Upgrades |
| Description_FAB | Produces Incredible Top-End Horsepower |
| Description_FAB | Retains Good Throttle Response and Acceleration |
| Description_INV | RPM BBC Rectangular Port Intake Manifld |
| Description_KEY | 7163; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Performer RPM; Satin |
| Description_LAB | Performer RPM Big Block Chevy 2-R Intake Manifold |
| Description_MKT | Edelbrock part #7163 Performer RPM 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port cylinder heads. This dual-plane high-rise manifold offers maximum horsepower with a broad torque curve. No provisions for exhaust heated chokes. Accepts late-model waterneck, air-conditioning, alternator and HEI equipment. |
| Description_SHO | { Sellable : Yes } |
| Description_SHP | { eo : 7in.} |
| Description_TRA | Carb pad height: 5.22" |
| Description_TRA | Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket #8031 for 1972-78. |
| Description_TRA | Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_TRA | Manifold height: A-4.45", B-6.0" (.25" taller than stock high-rise aluminum manifold) |
| Description_TRA | Port exit dimensions: 1.56"w x 2.24"t |
| Description_TRA | Recommended intake gasket: Edelbrock #7202 |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA | Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro. |
| Description_TRA | • Recommended intake gasket: Edelbrock # 7202 • Manifold height: A-4.45in.; B-6.0in. (.25in. taller than stock high-rise aluminum manifold) • Carb pad height: 5.22in. • Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket # 8031 for 1972-78. • Port exit dimensions: 1.56in.w x 2.24in.t • Will not fit under stock hood of Corvette; 1964-67 Chevelle or 1967-81 Camaro. • Use RTV sealant to properly seal end seals; such as Edelbrock High Temp Silicone sealant # 1076; DO NOT USE END SEALS GASKETS. • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Emission | Without EGR |
| Engine Make/Size | Chevy Big Block (396-502) |
| height | 7.5 |
| length | 23.62 |
| LTL | N |
| Number of Carbs | One |
| Position | N/A |
| RPM Range | 1500-6500 |
| Usage | Street/Hi-Performance |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| weight | 20.4 |
| width | 14.75 |