Availability:
Out of stock
CURT 51498 CURT 51498 7-Way RV Blade Trailer Brake Controller Tester
by CURT
SKU ds_BKDK_51498
Proudly Canadian
Albertan Owned
Supporting Canadian truckers since 2018
Secure Payments
Financing Available
SSL encrypted checkout with financing options
Trusted Brands
Top-Quality Suppliers
Authorized dealer for Fox, Bilstein, BFGoodrich & 50+ brands
Sold out
Original price
$614.17
-
Original price
$614.17
Original price
$614.17
$614.17
$614.17
-
$614.17
Current price
$614.17
Description
For any type of trailer, part of towing responsibly is making sure your trailer lights are working properly. With heavy-duty trailers, such as a large boat trailer or 5th wheel camper, that responsibility is even greater. Giving safety its proper priority is easy with the CURT 7-way RV blade trailer brake controller tester. This sophisticated towing electrical tester plugs into any 7-way RV blade socket and allows you to check your vehicle wiring for battery voltage, brake voltage and signal circuits. The CURT 7-way RV blade brake controller tester accurately measures the brake and battery voltage output at your 7-way connector. It features a volt meter and a current meter for testing brake power and allows you to test the power output of your trailer brake controller unit. The 7-way brake controller tester can be used for trailers with two or more axles, and because it uses a special magnet system, brake controller output can be measured even without a trailer attached. It includes easy-to-follow testing instructions and a 20 cable for single-user, in-cab testing to make it even easier to get to the bottom of any electrical problem. Operating the CURT 7-way RV blade electrical tester is simple and does not require an additional power source. Simply plug the 7-way RV blade into your vehicles electrical socket, select your settings with the axle and voltage switches, and you are ready to begin. The tester is able to check your left and right turn signals, brake lights, tail lights and reverse lights if applicable. It also provides the voltage and current of your vehicles brake controller output. The CURT RV blade tester also offers a number of potential causes of electrical failure, including fuse issues, inadequate wiring, damaged wires or a defective brake controller. The CURT 7-way brake controller tester is compatible with all CURT trailer brake controllers and gives you the peace of mind to Bring It on any towing adventure.
Resources
Installation InstructionsSpecifications
| Box Height in Inches - XA | 0 |
| Box Length in Inches - XA | 0 |
| Box Width in Inches - XA | 0 |
| Class ID | 0 |
| Description_ABR | TEST |
| Description_ASC | 7-Way RV Blade Trailer Brake Controller Tester |
| Description_ASC | Can be used for two-axle or three-axle trailers |
| Description_ASC | Constructed with durable components for long life and dependability |
| Description_ASC | Current meter uses magnets to measure brake controller output without a trailer |
| Description_ASC | Includes a 20' cable for easy, single-user, in-cab testing |
| Description_ASC | Perfect for installing and troubleshooting tow vehicle / trailer wiring systems |
| Description_ASC | Tests vehicle wiring for battery voltage, brake voltage and signal circuits |
| Description_ASC | Volt meter indicator measures tow vehicle and electric brake voltage |
| Description_ASM | CURT 51498 7-Way RV Blade Trailer Brake Controller Tester |
| Description_DEF | Trailer Wire Tester |
| Description_DES | 7-Way RV Blade Trailer Brake Controller Tester |
| Description_EXT | CURT 51498 7-Way RV Blade Trailer Brake Controller Tester |
| Description_FAB | Can Be Used For Two-Axle Or Three-Axle Trailers |
| Description_FAB | Constructed w/Durable Components For Long Life And Dependability |
| Description_FAB | Current Meter Uses Magnets To Measure Brake Control Output |
| Description_FAB | Incl. A 20 ft. Cable For Easy Single-User In-Cab Testing |
| Description_FAB | Made In USA |
| Description_FAB | Perfect For Installing And Troubleshooting Wiring Systems |
| Description_FAB | Test Wiring For Battery Voltage Brake Voltage/Signal Circuits |
| Description_FAB | Volt Meter Indicator Measures Tow Vehicle And Electric Brakes |
| Description_INV | 7-Way RV Blade Brake Controller Tester |
| Description_KEY | brakes simulation wiring 7 pin force innovative products america simulations tools integrated load rv hitch emulator cab tow adaptive aftermarket ride side supplies timing cable trucks itbc 7-way truckside electronic trailers |
| Description_LAB | Made In Logo |
| Description_LAB | Proposition 65 |
| Description_MKT | For any type of trailer, part of towing responsibly is making sure your trailer lights are working properly. With heavy-duty trailers, such as a large boat trailer or 5th wheel camper, that responsibility is even greater. Giving safety its proper priority is easy with the CURT 7-way RV blade trailer brake controller tester. This sophisticated towing electrical tester plugs into any 7-way RV blade socket and allows you to check your vehicle wiring for battery voltage, brake voltage and signal circuits. The CURT 7-way RV blade brake controller tester accurately measures the brake and battery voltage output at your 7-way connector. It features a volt meter and a current meter for testing brake power and allows you to test the power output of your trailer brake controller unit. The 7-way brake controller tester can be used for trailers with two or more axles, and because it uses a special magnet system, brake controller output can be measured even without a trailer attached. It includes easy-to-follow testing instructions and a 20 cable for single-user, in-cab testing to make it even easier to get to the bottom of any electrical problem. Operating the CURT 7-way RV blade electrical tester is simple and does not require an additional power source. Simply plug the 7-way RV blade into your vehicles electrical socket, select your settings with the axle and voltage switches, and you are ready to begin. The tester is able to check your left and right turn signals, brake lights, tail lights and reverse lights if applicable. It also provides the voltage and current of your vehicles brake controller output. The CURT RV blade tester also offers a number of potential causes of electrical failure, including fuse issues, inadequate wiring, damaged wires or a defective brake controller. The CURT 7-way brake controller tester is compatible with all CURT trailer brake controllers and gives you the peace of mind to Bring It on any towing adventure. |
| Description_MKT | For any type of trailer, part of towing responsibly is making sure your trailer lights are working properly. With heavy-duty trailers, such as a large boat trailer or 5th wheel camper, that responsibility is even greater. Giving safety its proper priority is easy with the CURT 7-way RV blade trailer brake controller tester. This sophisticated towing electrical tester plugs into any 7-way RV blade socket and allows you to check your vehicle wiring for battery voltage, brake voltage and signal circuits. The CURT 7-way RV blade brake controller tester accurately measures the brake and battery voltage output at your 7-way connector. It features a volt meter and a current meter for testing brake power and allows you to test the power output of your trailer brake controller unit. The 7-way brake controller tester can be used for trailers with two or more axles, and because it uses a special magnet system, brake controller output can be measured even without a trailer attached. It includes easy-to-follow testing instructions and a 20' cable for single-user, in-cab testing to make it even easier to get to the bottom of any electrical problem. Operating the CURT 7-way RV blade electrical tester is simple and does not require an additional power source. Simply plug the 7-way RV blade into your vehicle's electrical socket, select your settings with the axle and voltage switches, and you are ready to begin. The tester is able to check your left and right turn signals, brake lights, tail lights and reverse lights if applicable. It also provides the voltage and current of your vehicle's brake controller output. The CURT RV blade tester also offers a number of potential causes of electrical failure, including fuse issues, inadequate wiring, damaged wires or a defective brake controller. The CURT 7-way brake controller tester is compatible with all CURT trailer brake controllers and gives you the peace of mind to Bring It on any towing adventure. |
| Description_SHO | 7-Way RV Blade Trail |
| Description_SHO | Brake Control Tester |
| Description_SLA | For any type of trailer, part of towing responsibly is making sure your trailer lights are working properly. With heavy-duty trailers, such as a large boat trailer or 5th wheel camper, that responsibility is even greater. Giving safety its proper priority is easy with the CURT 7-way RV blade trailer brake controller tester. This sophisticated towing electrical tester plugs into any 7-way RV blade socket and allows you to check your vehicle wiring for battery voltage, brake voltage and signal circuits. The CURT 7-way RV blade brake controller tester accurately measures the brake and battery voltage output at your 7-way connector. It features a volt meter and a current meter for testing brake power and allows you to test the power output of your trailer brake controller unit. The 7-way brake controller tester can be used for trailers with two or more axles, and because it uses a special magnet system, brake controller output can be measured even without a trailer attached. It includes easy-to-follow testing instructions and a 20' cable for single-user, in-cab testing to make it even easier to get to the bottom of any electrical problem. Operating the CURT 7-way RV blade electrical tester is simple and does not require an additional power source. Simply plug the 7-way RV blade into your vehicle's electrical socket, select your settings with the axle and voltage switches, and you are ready to begin. The tester is able to check your left and right turn signals, brake lights, tail lights and reverse lights if applicable. It also provides the voltage and current of your vehicle's brake controller output. The CURT RV blade tester also offers a number of potential causes of electrical failure, including fuse issues, inadequate wiring, damaged wires or a defective brake controller. The CURT 7-way brake controller tester is compatible with all CURT trailer brake controllers and gives you the peace of mind to Bring It on any towing adventure. |
| Finish - XA | N/A |
| height | 7.0 |
| Item Class - XA | OBS |
| Item Height - XA | 0.000 |
| Item Length - XA | 0.000 |
| Item Width - XA | 0.000 |
| length | 12.0 |
| LTL | N |
| Parcel Allowed - XA | Yes |
| Product Weight - XA | 0.000 |
| Rate Class - XA | 70.0 |
| Retail Height - XA | 7.000 |
| Retail Length - XA | 12.000 |
| Retail Width - XA | 10.000 |
| Shipping Weight - XA | 12.000 |
| Tariff 301 - XA | No |
| Title | 7-Way RV Blade Trailer Brake Controller Tester |
| Warranty | One-Year Limited Warranty |
| weight | 12.0 |
| width | 10.0 |
