{"product_id":"performance-accessories-pa70033-3-inch-body-lift-kit-01-11-ford-ranger-and-edge-mazda-b-series-2wd-4wd-manual-trans-requires-pa3700-gas-performance-accessories-1","title":"Performance Accessories PA70033 3 Inch Body Lift Kit 01-11 Ford Ranger and Edge\/Mazda B-Series 2WD\/4WD Manual Trans Requires PA3700 Gas Performance Accessories","description":"\u003cp\u003eIn 1982 Ford engineered and designed a small truck platform so superior the Japanese wanted to use it for their Mazda trucks. The Performance Accessories Body Lift kit designed for this platform resulted in our best selling Ford kit to date. The affordability of this kit results from the fact it augments the existing OEM suspension for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 3 inches of additional lift and allowing up to 32 inch tires.\u003c\/p\u003e\u003cp\u003eThis is an easy to install kit that comes with all necessary kit components to maintain the OEM lines. Included in this kit are heavy duty laser cut front and rear bumper relocation brackets, CNC machined and zinc plated steering extensions, laser cut and zinc plated radiator relocation brackets, zinc plated square bed support channel, High Strength fastener hardware, and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. (Manual Transmission Requires PN-PA3700). A set of urethane wheel-well extensions (Gap-Guards 2WD PN-PA6737) or (Gap-Guards 2WD Splash Only PN-PA6733) or (Gap-Guards 4WD PN-PA6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 5 to 6 hours and comes complete with everything necessary for installation. \u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides 3 inch additional lift without modifying existing suspension system.\u003c\/li\u003e\n\u003cli\u003eAllows up to 32 inch tires and use of factory rims for improved ground clearance (33 inch with bumper valance trimmed)\u003c\/li\u003e\n\u003cli\u003eDoes Not alter the OEM suspension geometry.\u003c\/li\u003e\n\u003cli\u003eMaintains the superior Factory ride.\u003c\/li\u003e\n\u003cli\u003eKeeps center of gravity lower than comparable Suspension lift.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFiber-Glass reinforced Nylon body blocks\u003c\/li\u003e\n\u003cli\u003eCNC machined and zinc plated steering extensions\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Bumper relocation brackets to maintain OEM look\u003c\/li\u003e\n\u003cli\u003eLaser cut and Powder Coated Front and Rear Bumper relocation brackets\u003c\/li\u003e\n\u003cli\u003eLaser cut and Zinc Plated fittings and brackets\u003c\/li\u003e\n\u003cli\u003eHigh Strength fastener kits\u003c\/li\u003e\n\u003cli\u003eMade In The U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2001-2011 Ford Ranger and Edge 2WD\/4WD (Gas)\u003c\/li\u003e\n\u003cli\u003e2001-2011 Mazda B-Series 2WD\/4WD (Gas)\u003c\/li\u003e\n\u003cli\u003e(Manual Transmission Requires PA3700 Shift Extension For Above Vehicles)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003ch5\u003eSpecifications:\u003c\/h5\u003e\u003cbr\u003e\u003ctable class=\"descr-table\" border=\"0\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ebrand_logo\u003c\/td\u003e\n\u003ctd\u003ehttps:\/\/www.asapnetwork.org\/sites\/default\/files\/brands\/icons\/logo_2.jpg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ecolor_l\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eManual Transmission requires 3700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASM\u003c\/td\u003e\n\u003ctd\u003eThe Performance Accessories Body Lift kit designed for this platform resulted in our bestselling Ford kit to date. The affordability of this kit results from the fact it augments the existing OEM suspension for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 3in. of additional lift and allowing up to 32in. tires. This is an easy to install kit that comes with all necessary kit components to maintain the OEM lines.  Included in this kit are heavy duty laser cut front and rear bumper relocation brackets; CNC machined and zinc plated steering extensions; laser cut and zinc plated radiator relocation brackets; zinc plated square bed support channel; High Strength fastener hardware; and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. (Manual Transmission Requires PN-3700).  A set of urethane wheel-well extensions (Gap-Guards 2WD PN-6737) or (Gap-Guards 2WD Splash Only PN-6733) or (Gap-Guards 4WD PN-6732) are available separately; and are used to conceal any gaps between the body and frame. This system can be installed in 5 to 6 hours and comes complete with everything necessary for installation.  Additional Information: • Fiber-Glass reinforced Nylon body blocks • CNC machined and zinc plated steering extensions • Heavy Duty Bumper relocation brackets to maintain OEM look • Laser cut and Powder Coated Front and Rear Bumper relocation brackets • Laser cut and Zinc Plated fittings and brackets • High Strength fastener kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eBody Lift Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eBody Lift Kit; 3 in. Lift; Incl. Steering Extension; Frt\/Rr Bmpr Brackets; Nec. To Drill Out Some Body Bushings To Accom. Lrgr. Bolts;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAllows You To Increase Tire Size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBrackets Are Laser Cut\/Zinc Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCustom Machined Splined Steering Shaft Extensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDoes Not Altar Factory Ride Or OEM Geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFor Improved Ground Clearance\/Rugged Good Looks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFor Ultimate Corrosion Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eOther Parts Required For A Complete Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eMade In Logo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eProposition 65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThe Performance Accessories Body Lift kit designed for this platform resulted in our bestselling Ford kit to date. The affordability of this kit results from the fact it augments the existing OEM suspension for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 3? of additional lift and allowing up to 32? tires. This is an ?easy to install? kit that comes with all necessary kit components to maintain the OEM lines. Included in this kit are heavy duty laser cut front and rear bumper relocation brackets, CNC machined and zinc plated steering extensions, laser cut and zinc plated radiator relocation brackets, zinc plated square bed support channel, High Strength fastener hardware, and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. (Manual Transmission Requires PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2WD PN-6737) or (Gap-Guards 2WD Splash Only PN-6733) or (Gap-Guards 4WD PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 5 to 6 hours and comes complete with everything necessary for installation. Benefits: Provides 3? additional lift without modifying existing suspension system. Allows up to 32? tires and use of factory rims for improved ground clearance. (33? with bumper valance trimmed). DOES NOT alter the OEM suspension geometry. Maintains the superior Factory ride. Keeps center of gravity lower than comparable Suspension lift. Features: Fiber-Glass reinforced Nylon body blocks CNC machined and zinc plated steering extensions Heavy Duty Bumper relocation brackets to maintain OEM look Laser cut and Powder Coated Front and Rear Bumper relocation brackets Laser cut and Zinc Plated fittings and brackets High Strength fastener kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eLift Kit-Body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003edrive\u003c\/td\u003e\n\u003ctd\u003e2WD|4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efinish_l\u003c\/td\u003e\n\u003ctd\u003eZinc Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ehardware_included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eheight\u003c\/td\u003e\n\u003ctd\u003e4.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003einstallation_time\u003c\/td\u003e\n\u003ctd\u003e7-8 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elast_update\u003c\/td\u003e\n\u003ctd\u003e2023-02-23 03:17:22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elength\u003c\/td\u003e\n\u003ctd\u003e16.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elift_height\u003c\/td\u003e\n\u003ctd\u003e3 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocation\u003c\/td\u003e\n\u003ctd\u003eFront\/Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ematerial_l\u003c\/td\u003e\n\u003ctd\u003eNylon\/Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003esold_as\u003c\/td\u003e\n\u003ctd\u003eKit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003evehicle_type\u003c\/td\u003e\n\u003ctd\u003eTruck\/SUV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65 Message\u003c\/td\u003e\n\u003ctd\u003e(For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLife Time Replacement Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eweight\u003c\/td\u003e\n\u003ctd\u003e28.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewidth\u003c\/td\u003e\n\u003ctd\u003e12.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Performance Accessories","offers":[{"title":"Default Title","offer_id":32738472656980,"sku":"ds_BFRP_PA70033","price":355.89,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/1905\/5956\/products\/70033_PFA.jpg?v=1608190597","url":"https:\/\/www.truckpartsuperstore.ca\/products\/performance-accessories-pa70033-3-inch-body-lift-kit-01-11-ford-ranger-and-edge-mazda-b-series-2wd-4wd-manual-trans-requires-pa3700-gas-performance-accessories-1","provider":"Truck Part Superstore","version":"1.0","type":"link"}