{"product_id":"performance-accessories-pa112-2-inch-body-lift-kit-95-98-silverado-sierra-1500-2500-2wd-4wd-std-ext-crew-cab-w-auto-trans-gas-performance-accessories","title":"Performance Accessories PA112 2 Inch Body Lift Kit 95-98 Silverado\/Sierra 1500\/2500 2WD\/4WD Std\/Ext\/Crew Cab w\/Auto Trans Gas Performance Accessories","description":"\u003cp\u003eThe Performance Accessories PA112 Body Lift Kit set the standard high for Body Lift quality. This kit was the top selling kit for many years, and still ranks in the top five kits sold today. The 1995-1998 Chevrolet and General Motors 1\/2 ton and 3\/4 ton trucks were built with rock solid OEM suspensions. This kit augments the existing OEM setup for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 2 inches of additional lift and allowing up to 32 inch tires. This is an easy to install kit that comes with all the fixtures and brackets to maintain the OEM lines. Included in this kit are 3\/16 inch thick laser cut bumper relocation brackets (front only), CNC machined and Zinc plated PA1018 steel steering extensions, laser cut and zinc plated radiator relocation brackets, zinc plated square frame channel, High Strength fastener hardware, Fuel Filler Extension, and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. Optional rear bumper brackets are available PA10002.\u003c\/p\u003e\u003cp\u003eA set of urethane wheel-well extensions (Gap Guards Fleet Side 2WD PA6529), (Gap Guards Fleet Side 4WD PA6530), (Gap Guards Step Side 2WD PA6528), or (Gap Guards Step Side 4WD PA6531) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 6-7 hours and comes complete with everything necessary for installation.\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides 2 inches additional lift without modifying existing suspension system.\u003c\/li\u003e\n\u003cli\u003eAllows up to 32 inch tires and use of factory rims for improved ground clearance.\u003c\/li\u003e\n\u003cli\u003eDoes Not alter the OEM suspension geometry.\u003c\/li\u003e\n\u003cli\u003eMaintains the superior Factory ride.\u003c\/li\u003e\n\u003cli\u003eKeeps center of gravity lower than comparable Suspension lift.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFiber-Glass reinforced Nylon body blocks\u003c\/li\u003e\n\u003cli\u003eCNC machined and zinc plated PA1018 steel steering extensions\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Bumper relocation brackets to maintain OEM look (front only)\u003c\/li\u003e\n\u003cli\u003eLaser cut relocation brackets\u003c\/li\u003e\n\u003cli\u003eLaser cut and Zinc Plated fittings and brackets\u003c\/li\u003e\n\u003cli\u003eHigh Strength fastener kits\u003c\/li\u003e\n\u003cli\u003eMade In The U.S.A.\u003c\/li\u003e\n\u003cli\u003eSold As A Kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1995-1998 Chevrolet Silverado 1500\/2500 2WD\/4WD Standard\/Extended\/Crew Cab w\/Automatic Transmission (Gas)\u003c\/li\u003e\n\u003cli\u003e1995-1998 GMC Sierra 1500\/2500 2WD\/4WD Standard\/Extended\/Crew Cab w\/Automatic Transmission (Gas)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003ch5\u003eSpecifications:\u003c\/h5\u003e\u003cbr\u003e\u003ctable class=\"descr-table\" border=\"0\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ebrand_logo\u003c\/td\u003e\n\u003ctd\u003ehttps:\/\/www.asapnetwork.org\/sites\/default\/files\/brands\/icons\/logo_2.jpg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ecab_size\u003c\/td\u003e\n\u003ctd\u003eStandard Cab\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ecolor_l\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASM\u003c\/td\u003e\n\u003ctd\u003eThe Performance Accessories #112 Body Lift Kit set the standard high for Body Lift quality. The 1995-1998 Chevrolet and General Motor ½ ton\/¾ ton Trucks were built with rock solid OEM suspensions. This kit augments the existing OEM setup for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 2in. of additional lift and allowing up to 32in. tires. This is an easy to install kit that comes with all the fixtures and brackets to maintain the OEM lines.  Included in this kit are 3\/16in. thick laser cut and powder coated bumper relocation brackets ( front only); CNC machined and Zinc plated 1018 steel steering extensions; laser cut and zinc plated radiator relocation brackets; zinc plated square frame channel; High Strength fastener hardware; Fuel Filler Extension; and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. Optional rear bumper brackets are available PN-10003.  A set of urethane wheel-well extensions (Gap Guards Fleet Side 2WD PN-6529) ;(Gap Guards Fleet Side 4WD PN-6530); (Gap Guards Step Side 2WD PN-6528); or (Gap Guards Step Side 4WD PN-6531) are available separately; and are used to conceal any gaps between the body and frame. This system can be installed in 6-7 hours and comes complete with everything necessary for installation.  Additional Information: • Fiber-Glass reinforced Nylon body blocks • CNC machined and zinc plated 1018 steel steering extensions • Heavy Duty Bumper relocation brackets to maintain OEM look ( front only) • Laser cut and Powder Coated relocation brackets • Laser cut and Zinc Plated fittings and brackets • High Strength fastener kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eBody Lift Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eBody Lift Kit; 2 in. Lift; Incl. Steering Extension; Front Bumper Brackets;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBrackets Will Not Rust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCustom Machined Splined Steering Shaft Extensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGrade 5 Zinc Plated Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHigh Grade Reinforced Nylon Lift Blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eOther Parts Required For A Complete Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eState Of The Art CNC Equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eTrouble-Free Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eMade In Logo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eProposition 65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThe Performance Accessories #112 Body Lift Kit set the standard high for Body Lift quality. The 1995-1998 Chevrolet and General Motor ? ton \u0026amp; ? ton Trucks were built with rock solid OEM suspensions. This kit augments the existing OEM setup for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 2? of additional lift and allowing up to 32? tires. This is an easy to install kit that comes with all the fixtures and brackets to maintain the OEM lines. Included in this kit are 3\/16? thick laser cut and powder coated bumper relocation brackets* (*front only), CNC machined and Zinc plated 1018 steel steering extensions, laser cut and zinc plated radiator relocation brackets, zinc plated square frame channel, High Strength fastener hardware, Fuel Filler Extension, and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. Optional rear bumper brackets are available PN-10003. A set of urethane wheel-well extensions (Gap Guards Fleet Side 2WD PN-6529) ,(Gap Guards Fleet Side 4WD PN-6530), (Gap Guards Step Side 2WD PN-6528), or (Gap Guards Step Side 4WD PN-6531) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 6-7 hours and comes complete with everything necessary for installation. Benefits: Provides 2? additional lift without modifying existing suspension system. Allows up to 32? tires and use of factory rims for improved ground clearance. DOES NOT alter the OEM suspension geometry. Maintains the superior Factory ride. Keeps center of gravity lower than comparable Suspension lift. Features: Fiber-Glass reinforced Nylon body blocks CNC machined and zinc plated 1018 steel steering extensions Heavy Duty Bumper relocation brackets* to maintain OEM look (*front only) Laser cut and Powder Coated relocation brackets Laser cut and Zinc Plated fittings and brackets High Strength fastener kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eLift Kit-Body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003edrive\u003c\/td\u003e\n\u003ctd\u003e2WD|4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efinish_l\u003c\/td\u003e\n\u003ctd\u003eZinc Plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ehardware_included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eheight\u003c\/td\u003e\n\u003ctd\u003e4.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003einstallation_time\u003c\/td\u003e\n\u003ctd\u003e6-7 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elast_update\u003c\/td\u003e\n\u003ctd\u003e2023-02-23 03:20:16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elength\u003c\/td\u003e\n\u003ctd\u003e16.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elift_height\u003c\/td\u003e\n\u003ctd\u003e2 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocation\u003c\/td\u003e\n\u003ctd\u003eFront\/Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ematerial_l\u003c\/td\u003e\n\u003ctd\u003eNylon\/Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003esold_as\u003c\/td\u003e\n\u003ctd\u003eKit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003evehicle_type\u003c\/td\u003e\n\u003ctd\u003eTruck\/SUV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLife Time Replacement Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eweight\u003c\/td\u003e\n\u003ctd\u003e25.55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewidth\u003c\/td\u003e\n\u003ctd\u003e12.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Performance Accessories","offers":[{"title":"Default Title","offer_id":32738461581396,"sku":"ds_BFRP_PA112","price":407.44,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/1905\/5956\/products\/112_PFA.jpg?v=1608188039","url":"https:\/\/www.truckpartsuperstore.ca\/products\/performance-accessories-pa112-2-inch-body-lift-kit-95-98-silverado-sierra-1500-2500-2wd-4wd-std-ext-crew-cab-w-auto-trans-gas-performance-accessories","provider":"Truck Part Superstore","version":"1.0","type":"link"}