{"product_id":"fabtech-k2322dl-ball-joint-control-arm-lift-system-1","title":"Fabtech K2322DL Ball Joint Control Arm Lift System","description":"Fabtech's Upper Control Arm system provides a 3.5\" lift over stock with increased wheel travel and no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock ride. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Rear lift comes from 1.5\" blocks and u-bolts.This 3.5\" Upper Control Arm system allows clearance of 31\" tires without the removal or cutting of the factory Intrusion Beams located in the front fenderwell. The Intrusion Beams are an integral part of the front collision safety impact feature of the Ranger and limits tire clearance to a 31\" tire with a 3.5\" lift. For Ranger owners that want to run a 33\" tire, Fabtech offers optional replacement Offset Intrusion Beams. They directly replace the factory units helping to retain the safety feature of the Beams while allowing clearance of 33\" tires. These 1\/4\" thick steel Beams are offset to allow full steer with 33\/12.50R tires w\/ a 5\" back space wheel.\u003cbr\u003e\u003cbr\u003e\u003ch5\u003eSpecifications:\u003c\/h5\u003e\u003cbr\u003e\u003ctable class=\"descr-table\" border=\"0\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalifornia Proposition 65\u003c\/td\u003e\n\u003ctd\u003eWARNING: Cancer \u0026amp; Reproductive Harm and image\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eTIRE SIZE - 285\/55R20 WHEEL - 20X9 W\/5\" BS W\/MINOR TRIMMING; TIRE SIZE - 275\/65R18 WHEEL - 18X9 W\/5\" BS W\/MINOR TRIMMING; TIRE SIZE - 265\/70R17 W\/FACTORY WHEELS \u0026amp; MINOR TRIMMING; TIRE SIZE - 255\/75R17 W\/FACTORY WHEELS \u0026amp; MINOR TRIMMING; TIRE SIZE - 265\/65R18 W\/FACTORY WHEELS \u0026amp; MINOR TRIMMING; 47. FITS SUPERCREW ONLY.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eTIRE SIZE-285\/55R20 WHEEL-20X9 W\/5in. BS W\/MINOR TRIMMING; TIRE SIZE-275\/65R18 WHEEL-18X9 W\/5in. BS W\/MINOR TRIMMING; TIRE SIZE-265\/70R17 W\/FACTORY WHEELS\/MINOR TRIMMING; TIRE SIZE-255\/75R17 W\/FACTORY WHEELS\/MINOR TRIMMING; TIRE SIZE-265\/65R18 W\/FACTORY WHEELS\/MINOR TRIMMING; 47. FITS SUPERCREW ONLY.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eSuspension Lift Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003e2.25DLSS N\/R REAR RANGER 3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003e3.5\" BJ UCA SYS W\/ 2.25DLSS 2019-20 FORD RANGER 4WD W\/O INTRUSION BEAM KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eBall Joint Control Arm Lift System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eBJ UCA KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003e3.5\" BJ UCA SYS W\/ 2.25DLSS 2019-20 FORD RANGER 4WD W\/O INTRUSION BEAM KIT.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eBall Joint Control Arm Lift System; 3.5 in. Lift; w\/Dirt Logic 2.25 Resi Rear Shock; w\/o Intrusion Beam Kit; Incl. PN [FTS22293\/FTS811482];\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003e2 to 3 Hours Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNo Cutting Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNo Drilling Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNo Driveshaft Modification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNo Loss Of Ground Clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNo Welding Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eSimplified Design With Fast Install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eSteering Knuckles Retain Proper ESC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eFabtech-3.5\" BJ UCA SYS W\/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eProposition 65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eFabtech's Upper Control Arm system provides a 3.5\" lift over stock with increased wheel travel and no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock ride. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Rear lift comes from 1.5\" blocks and u-bolts.This 3.5\" Upper Control Arm system allows clearance of 31\" tires without the removal or cutting of the factory Intrusion Beams located in the front fenderwell. The Intrusion Beams are an integral part of the front collision safety impact feature of the Ranger and limits tire clearance to a 31\" tire with a 3.5\" lift. For Ranger owners that want to run a 33\" tire, Fabtech offers optional replacement Offset Intrusion Beams. They directly replace the factory units helping to retain the safety feature of the Beams while allowing clearance of 33\" tires. These 1\/4\" thick steel Beams are offset to allow full steer with 33\/12.50R tires w\/ a 5\" back space wheel.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock like ride. Fabtech's Upper Control Arms address the geometry of the front suspension with the new ride height for proper align ability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Rear lift comes from 1.5in blocks and u-bolts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003e3.5\" BJ UCA SYS W\/ 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eLftKt-Suspw\/Shock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eheight\u003c\/td\u003e\n\u003ctd\u003e15.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elength\u003c\/td\u003e\n\u003ctd\u003e32.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift\/Drop Height\u003c\/td\u003e\n\u003ctd\u003e3.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLTL\u003c\/td\u003e\n\u003ctd\u003eN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTitle\u003c\/td\u003e\n\u003ctd\u003eFabtech 3.5 in. BJ UCA SYS W\/ 2.25DLSS 2019-20 FORD RANGER 4WD W\/O INTRUSION BEAM KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65 Message\u003c\/td\u003e\n\u003ctd\u003eWarning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eweight\u003c\/td\u003e\n\u003ctd\u003e65.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewidth\u003c\/td\u003e\n\u003ctd\u003e15.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Fabtech","offers":[{"title":"Default Title","offer_id":32739896262740,"sku":"ds_BKBN_K2322DL","price":1793.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/1905\/5956\/products\/k2322dl-kit.jpg?v=1603061143","url":"https:\/\/www.truckpartsuperstore.ca\/products\/fabtech-k2322dl-ball-joint-control-arm-lift-system-1","provider":"Truck Part Superstore","version":"1.0","type":"link"}