{"product_id":"edelbrock-77929-sellable-yes","title":"Edelbrock 77929 { Sellable : Yes }","description":"The Edelbrock part #77929 Big Block Chrysler Victor Series cylinder head is used by many of the best racers in the country and are the best choice for all-out competition. Edelbrock engineers work with leading racers like Billy Glidden, John Urist and Pat Musi to produce the ultimate components for racing. The end results is a competition ready cylinder head that features a cylinder head which is compatible with OE valve train and pistons for bolt-on convenience while Victor cylinder head features raised runners, revised chambers and relocated valves for all-out competition.VICTOR B\/B CHRYSLER FEATURES:- The best standard port location cylinder head available for competition big-block Chryslers- Intake ports are raised .650\", exhaust ports are raised .250\" for improved flow- The intake flange is extended .950\" to eliminate the need for intake spacer plates- Cylinder head will fit Edelbrock Victor manifolds for both high and low deck engines- Sold without springs or retainers; use recommended springs to match your camshaft- Exhaust flange is extended .300\" from stock (same as Mopar Stage 6) featuring dry exhaust bolt holes with Heli-Coil thread inserts- 72cc combustion chamber volume- Cylinder head part #77939 comes bare with valves only\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.catalograck.com\/ImgVD\/EDE\/77919779297793977949-VictorBig-BlockChrys.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003ch5\u003eSpecifications:\u003c\/h5\u003e\u003cbr\u003e\u003ctable class=\"descr-table\" border=\"0\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Ported\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombustion Chamber Volume\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Type\u003c\/td\u003e\n\u003ctd\u003eBare With Valves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinder Head Type\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeck Thickness\u003c\/td\u003e\n\u003ctd\u003e0.625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ABR\u003c\/td\u003e\n\u003ctd\u003eCyl. Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eEngine Cylinder Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCYLINDER HEAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock part #77929 Big Block Chrysler Victor Series cylinder heads are used by many of the best racers in the country and are the best choice for all-out competition.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan Be Machined To Match Max Wedge Ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDesigned To Fit All B And RB Chrysler Engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDual Quench 75cc Combustion Changers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFit Existing Victor Manifolds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFor Race Use Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eEdelbrock BB Chrysler Cylinder Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_KEY\u003c\/td\u003e\n\u003ctd\u003eEdelbrock; BBC Head; Tempered A356; V8; Cylinder Heads; 77929; Big Block Chevy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eVictor RB\/ B Big-Block Chrysler Cylinder Head W\/ Valves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eVictor RB\/B Big-Block Chrysler Cylinder Head W\/Valves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThe Edelbrock part #77929 Big Block Chrysler Victor Series cylinder head is used by many of the best racers in the country and are the best choice for all-out competition. Edelbrock engineers work with leading racers like Billy Glidden, John Urist and Pat Musi to produce the ultimate components for racing. The end results is a competition ready cylinder head that features a cylinder head which is compatible with OE valve train and pistons for bolt-on convenience while Victor cylinder head features raised runners, revised chambers and relocated valves for all-out competition. VICTOR B\/B CHRYSLER FEATURES: The best standard port location cylinder head available for competition big-block Chryslers. Intake ports are raised .650\", exhaust ports are raised .250\" for improved flow. The intake flange is extended .950\" to eliminate the need for intake spacer plates. Cylinder head will fit Edelbrock Victor manifolds for both high and low deck engines. Sold without springs or retainers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThe Edelbrock part #77929 Big Block Chrysler Victor Series cylinder head is used by many of the best racers in the country and are the best choice for all-out competition. Edelbrock engineers work with leading racers like Billy Glidden, John Urist and Pat Musi to produce the ultimate components for racing. The end results is a competition ready cylinder head that features a cylinder head which is compatible with OE valve train and pistons for bolt-on convenience while Victor cylinder head features raised runners, revised chambers and relocated valves for all-out competition.VICTOR B\/B CHRYSLER FEATURES:- The best standard port location cylinder head available for competition big-block Chryslers- Intake ports are raised .650\", exhaust ports are raised .250\" for improved flow- The intake flange is extended .950\" to eliminate the need for intake spacer plates- Cylinder head will fit Edelbrock Victor manifolds for both high and low deck engines- Sold without springs or retainers; use recommended springs to match your camshaft- Exhaust flange is extended .300\" from stock (same as Mopar Stage 6) featuring dry exhaust bolt holes with Heli-Coil thread inserts- 72cc combustion chamber volume- Cylinder head part #77939 comes bare with valves only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003euse recommended springs to match your camshaft. Exhaust flange is extended .300\" from stock (same as Mopar Stage 6) featuring dry exhaust bolt holes with Heli-Coil thread inserts. 72cc combustion chamber volume. Cylinder head part #77939 comes bare with valves only.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003e{ Sellable : Yes }\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHP\u003c\/td\u003e\n\u003ctd\u003e{ eo : 2in.}\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eFor headers, contact TTI (951) 371-4878. Offset intake rockers required, exhaust side accepts standard-spec rockers. May require additional pushrod hole clearance for some combinations. Bare heads will have valve guides \u0026amp; seats installed, but will require final sizing and a valve job to match the valves you will be using. These heads require the use of a 14mm x 3\/4\" reach, flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5\/8\", pushrod diameter: 3\/8\".\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eFor headers; contact TTI (951) 371-4878. Offset intake rockers required; exhaust side accepts standard-spec rockers. May require additional pushrod hole clearance for some combinations. Bare heads will have valve guides seats installed; but will require final sizing and a valve job to match the valves you will be using. These heads require the use of a 14mm x 3\/4in. reach; flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5\/8in.; pushrod diameter: 3\/8in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEGR Port\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmission\u003c\/td\u003e\n\u003ctd\u003eNon-Emissions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Make\/Size\u003c\/td\u003e\n\u003ctd\u003eMopar 383-440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust Port Location\u003c\/td\u003e\n\u003ctd\u003e+.250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust Runner Volume\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust Valve Diameter\u003c\/td\u003e\n\u003ctd\u003e1.81\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFamily\u003c\/td\u003e\n\u003ctd\u003eVictor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efinish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade Type\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuide Material\u003c\/td\u003e\n\u003ctd\u003eManganese Bronze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuide Plates Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Casting Number\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eheight\u003c\/td\u003e\n\u003ctd\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake Runner Volume\u003c\/td\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake Valve Diameter\u003c\/td\u003e\n\u003ctd\u003e2.20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elength\u003c\/td\u003e\n\u003ctd\u003e26.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreparation\u003c\/td\u003e\n\u003ctd\u003eBolt On (Not Required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSold Individually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetainer Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGL\u003c\/td\u003e\n\u003ctd\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat Angle\u003c\/td\u003e\n\u003ctd\u003eExhaust 45 deg\/Intake 45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat Material\u003c\/td\u003e\n\u003ctd\u003eDuctile Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eVictor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eValves Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsage\u003c\/td\u003e\n\u003ctd\u003eRacing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Angle\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Springs Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Stem Diameter\u003c\/td\u003e\n\u003ctd\u003e0.3438\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65 Message\u003c\/td\u003e\n\u003ctd\u003eWARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eweight\u003c\/td\u003e\n\u003ctd\u003e37.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewidth\u003c\/td\u003e\n\u003ctd\u003e11.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":32541295476820,"sku":"ds_BDVJ_77929","price":1639.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/1905\/5956\/products\/077929_v1.jpg?v=1608171335","url":"https:\/\/www.truckpartsuperstore.ca\/products\/edelbrock-77929-sellable-yes","provider":"Truck Part Superstore","version":"1.0","type":"link"}