{"product_id":"edelbrock-2601-sellable-yes","title":"Edelbrock 2601 { Sellable : Yes }","description":"Edelbrock part #2601 Performer Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys. This Performer Air-Gap intake manifold features an air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. No provision for exhaust heated chokes or exhaust crossover. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.catalograck.com\/ImgVD\/EDE\/21012104211626012604270127163701370671017.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.catalograck.com\/ImgVD\/EDE\/Edelbrock_General_Warranty.pdf\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003ch5\u003eSpecifications:\u003c\/h5\u003e\u003cbr\u003e\u003ctable class=\"descr-table\" border=\"0\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasic Operating RPM Range\u003c\/td\u003e\n\u003ctd\u003eIdle-5500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter Maximum Height\u003c\/td\u003e\n\u003ctd\u003e4.320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Ported\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCylinder Head Type\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ABR\u003c\/td\u003e\n\u003ctd\u003eIntake Mnfld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASM\u003c\/td\u003e\n\u003ctd\u003eChevrolet:Small-Block Gen I:265 (4.3L)\/267 (4.4L)\/283 (4.6L)\/302 (4.9L)\/305 (5.0L)\/307 (5.0L)\/327 (5.4L)\/350 (5.7L)\/400 (6.6L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eEngine Intake Manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eINTAKE MANIFOLD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock Performer Air-Gap Intake Manifold for 1955-86 262-400 Small-Block Chevrolet V8's. Work with Either a Q-Jet or a 4150-Style Square-Bore Carburetor. Non-EGR.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock Performer Air-Gap Intake Manifold for 1955-86 262-400 Small-Block Chevrolet V8ft.s. Work with Either a Q-Jet or a 4150-Style Square-Bore Carburetor. Non-EGR.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAir Gap Causes Cool and Dense Mixture More Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAlso In Polished\/PermaStar\/EnduraShine Finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBased On Performer-Series With Unique Air Gap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDual-Plane Low-Rise Intake w\/180 Deg. Firing Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eExcellent Throttle Response and Mid-Range Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFits Both Spread and Square Bore Carburetors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFor Idle to 5500 RPM Street-Driven Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePatented Runner Design Ensures Broad Torque Curve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003ePerformer Air-Gap SBC Intake Manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_KEY\u003c\/td\u003e\n\u003ctd\u003e2601; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Performer; Satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003ePerformer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock part #2601 Performer Air-Gap intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys. This Performer Air-Gap intake manifold features an air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. No provision for exhaust heated chokes or exhaust crossover. Fits spread-bore or square-bore carburetors. Will not fit under stock Corvette hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003e{ Sellable : Yes }\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHP\u003c\/td\u003e\n\u003ctd\u003e{ eo : 7in.}\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarb pad height: 4.32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm. Use Bracket #8031 or #8036 for 1972-78.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eDO NOT OVERTIGHTEN NPT\/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eEven though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eHardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eManifold ht: A-3.72\", B-4.92\" (.27\" taller than #2101)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eNPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003ePort exit dimensions: 1.14\" x 1.88\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eProper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eRecommended intake gasket: Edelbrock #7201.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eSealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eUse RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003e• Manifold ht: A-3.72in.; B-4.92in. (.27in. taller than # 2101); • Carb pad height: 4.32in. • Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm. Use Bracket # 8031 or # 8036 for 1972-78. • Port exit dimensions: 1.14in. x 1.88in. • Recommended intake gasket: Edelbrock # 7201. • Use RTV sealant to properly seal end seals; such as Edelbrock High Temp Silicone sealant # 1076; DO NOT USE END SEALS GASKETS. • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. • NPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. • DO NOT OVERTIGHTEN NPT\/Pipe fittings; this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread. • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. • Even though manifolds are compatible with EGR systems; this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality. • Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEGR Port\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmission\u003c\/td\u003e\n\u003ctd\u003eWithout EGR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Make\/Size\u003c\/td\u003e\n\u003ctd\u003eChevy Small Block (262-400)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efinish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Type\u003c\/td\u003e\n\u003ctd\u003e4150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Maximum Height\u003c\/td\u003e\n\u003ctd\u003e3.720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Or Seal Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade Type\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eheight\u003c\/td\u003e\n\u003ctd\u003e5.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elength\u003c\/td\u003e\n\u003ctd\u003e22.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLTL\u003c\/td\u003e\n\u003ctd\u003eN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Carbs\u003c\/td\u003e\n\u003ctd\u003eOne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Maximum Height\u003c\/td\u003e\n\u003ctd\u003e4.920\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGL\u003c\/td\u003e\n\u003ctd\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRPM Range\u003c\/td\u003e\n\u003ctd\u003eIdle -5500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePerformer Air-Gap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Or Dual Plane Type\u003c\/td\u003e\n\u003ctd\u003eDual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsage\u003c\/td\u003e\n\u003ctd\u003eStreet\/Hi-Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Model\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWARNING CA Proposition 65 Message\u003c\/td\u003e\n\u003ctd\u003eWARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eweight\u003c\/td\u003e\n\u003ctd\u003e16.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewidth\u003c\/td\u003e\n\u003ctd\u003e10.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":32534259531860,"sku":"ds_BDVJ_2601","price":654.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/1905\/5956\/products\/002601_v1_20091007.jpg?v=1603057197","url":"https:\/\/www.truckpartsuperstore.ca\/products\/edelbrock-2601-sellable-yes","provider":"Truck Part Superstore","version":"1.0","type":"link"}