{"product_id":"bd-diesel-1065194f-stage-5-track-master-transmission-complete","title":"BD Diesel 1065194F Stage 5 Track-Master Transmission; Complete;","description":"Are you looking to rebuild your own transmission and needing some specialty parts to match your application? BD is offering a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. For an experienced builder these kits can be a big money saver as you will not have to deal with core charges and can save over 400 dollars in freight charges!    ** Clutch Count: OD 6; Clutch Count: OD DIRECT 10; New input shafts and hub; Fully rollerized geartrain all thrust washers replaced with bearings; New design full manual valve body; Up to 80% higher clutch apply pressures over the stock unit; Pressure increase starts at much lower engine rpm's and at lighter throttle pedal position movement; Light throttle shift firmness is also maintained; No 48RE 2-3 shuttle issue; Upgraded governor pressure transducer (47RE\/48RE); Upgraded governor solenoid - Twice the burst pressure than stock; Cooler line case saver in every transmission; Added heavy-duty clutches with up to 25% more material than stock; Machined forward (rear) beveled pressure plate; Machined overdrive brake (front \u0026amp; rear) pressure plate; Machined direct clutch (front) piston; Machined front ring gear; High temp\/energy Raybestos band; Rigid intermediate band; Billet band strut \u0026amp; anchor; Billet dual ring accumulator piston; Billet dual ring kickdown servo; Billet front drum; Billet output shaft; Billet intermediate shaft drilled for increased lube; Billet \"Big\" fine spline input shaft; New stator support shaft; Stock thrust washers replaced with roller Torrington bearings; BD auxiliary full flow filter kit for extra protection; Clutch Count: FORWARD 5; Clutch Count: DIRECT 6; BD rigid aluminum heavy duty transmission pan\u003cbr\u003e\u003cbr\u003e\u003ch5\u003eSpecifications:\u003c\/h5\u003e\u003cbr\u003e\u003ctable class=\"descr-table\" border=\"0\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eAutomatic Transmission Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eStage 5 Track-Master Transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eTransmission, Stage 5 Track-Master - 2003-2004 Dodge 48RE 4wd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eStage 5 Track-Master Transmission; Complete;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eTransmission, Stage 5 Track-Master - 2003-2004 Dodge 48RE 4wd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003e12 Months or 24000 Mile Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBD auxiliary full flow filter kit for extra protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBD rigid aluminum heavy duty transmission pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet \"Big\" fine spline input shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet band lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet band strut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet dual ring accumulator piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet dual ring kickdown servo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet front drum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet Input Shaft to take the \"snap\" from rapid throttle and high horsepower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet intermediate shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBillet output shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eClutch Count: DIRECT 7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eClutch Count: FORWARD 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eClutch Count: OD 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eClutch Count: OD DIRECT 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCooler line case saver in every transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDrilled intermediate shaft for increased lubrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eEach Transmission Is Dyno Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eEvery transmission is tested on a dyno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncrease the durability of your drivetrain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncreased line pressure to 190-200psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eMagnetic drain plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eModified manual valve for lube in all positions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNo Shuttle Shifting Problems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNot warranted for Race or Sled Pull use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePan Adds 1qt Extra Oil Capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePan adds 2qt extra oil capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePan heat-dissipating fins keep temperature down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eStock thrust bushings replaced with roller Torrington bearings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eUpgraded governor pressure transducer (47RE\/48RE) - Twice the burst pressure than stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eUpgraded governor solenoid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eUpgraded Valvebody\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eTRANSMISSION DODGE 2003-2004 48RE 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eProposition 65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eAre you looking to rebuild your own transmission and needing some specialty parts to match your application? BD is offering a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. For an experienced builder these kits can be a big money saver as you will not have to deal with core charges and can save over 400 dollars in freight charges!    ** Clutch Count: OD 6; Clutch Count: OD DIRECT 10; New input shafts and hub; Fully rollerized geartrain all thrust washers replaced with bearings; New design full manual valve body; Up to 80% higher clutch apply pressures over the stock unit; Pressure increase starts at much lower engine rpm's and at lighter throttle pedal position movement; Light throttle shift firmness is also maintained; No 48RE 2-3 shuttle issue; Upgraded governor pressure transducer (47RE\/48RE); Upgraded governor solenoid - Twice the burst pressure than stock; Cooler line case saver in every transmission; Added heavy-duty clutches with up to 25% more material than stock; Machined forward (rear) beveled pressure plate; Machined overdrive brake (front \u0026amp; rear) pressure plate; Machined direct clutch (front) piston; Machined front ring gear; High temp\/energy Raybestos band; Rigid intermediate band; Billet band strut \u0026amp; anchor; Billet dual ring accumulator piston; Billet dual ring kickdown servo; Billet front drum; Billet output shaft; Billet intermediate shaft drilled for increased lube; Billet \"Big\" fine spline input shaft; New stator support shaft; Stock thrust washers replaced with roller Torrington bearings; BD auxiliary full flow filter kit for extra protection; Clutch Count: FORWARD 5; Clutch Count: DIRECT 6; BD rigid aluminum heavy duty transmission pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eFor applications that are pushed to the limits on the track, BD offers the \"Track-Master\" competition series - built to take the extreme horsepower and torque. Features \"Big\" fine spline input shaft, all billet shafts, billet steal direct drum, one piece servo\/cover, extra wide solid band with red lining, racer red forward\/direct frictions, koline forward\/direct steals, auxiliary filter kit and heavy duty pan. Recommended for - 650 RWHP and above applications.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eAuto Trans Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eTRANSMISSION STAGE 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eheight\u003c\/td\u003e\n\u003ctd\u003e27.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003elength\u003c\/td\u003e\n\u003ctd\u003e23.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLTL\u003c\/td\u003e\n\u003ctd\u003eN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eweight\u003c\/td\u003e\n\u003ctd\u003e240.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewidth\u003c\/td\u003e\n\u003ctd\u003e44.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":37771250401461,"sku":"ds_BKJX_1065194F","price":11543.58,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0283\/1905\/5956\/products\/1065194f_1024px.jpg?v=1611402300","url":"https:\/\/www.truckpartsuperstore.ca\/products\/bd-diesel-1065194f-stage-5-track-master-transmission-complete","provider":"Truck Part Superstore","version":"1.0","type":"link"}